Manufacturer for Shacman F2000 6×4 Lorry Truck - 6×4 Tanker F3000 – Automobile Holding Detail:
| The F3000 Tanker Truck | |
| Drive Type | 6×4、8×4 |
| Cabin | Lengthened High Roof (N) Lengthened Flat Roof (J) Special Purpose Flat Roof (D) |
| Engine | Weichai Power WP10, WP12 Cummins ISM Series |
| Emission Level | Euro II, III, IV, V |
| Transmission | Manual Transmission 9F, 10F,12F Automatic Transmission |
| Clutch | ETONФ430 Diaphragm Imported |
| Front Axle | MAN 7.5 Ton (Drum) |
| Rear Axle | 16 Ton MAN Double Stage Punch Welding for Mixer and powder Trucks,
13 Ton MAN Double Stage for rest |
| Suspension | Multi Leaf Springs |
| Frame(in mm) | 850×300(8+5) 850×300(8+7)for Mixer Trucks 850×300(8+5)for Rest |
| Fuel Tank | 300 / 400 Liter Aluminum 380 Liter Steel |
| Tires | 11.00R20、12.00R20 |
Product detail pictures:

Related Product Guide:
New heavy duty trucks expected to build capacity | News | Shacman F3000 6×4 Storage-Stake Truck
Growth & Jobs | Training for Truckers: Tank Weld wants to create minimum standards for local and export market | News | Shacman S2000 6×4 Truck Chassis
We not only will try our best to offer excellent services to every customer, but also are ready to receive any suggestion offered by our customers for Manufacturer for Shacman F2000 6×4 Lorry Truck - 6×4 Tanker F3000 – Automobile Holding, The product will supply to all over the world, such as: Eindhoven , Gabon , Islamabad , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
A good manufacturers, we have cooperated twice, good quality and good service attitude.









