Manufacturer for Shacman 6×4 450hp Truck Chassis - 6×4 Cement F3000 – Automobile Holding Detail:
| The F3000 Cement Truck | |
| Drive Type | 6×4、8×4 |
| Cabin | Lengthened High Roof (N) Lengthened Flat Roof (J) Special Purpose Flat Roof (D) |
| Engine | Weichai Power WP10, WP12 Cummins ISM Series |
| Emission Level | Euro II, III, IV, V |
| Transmission | Manual Transmission 9F, 10F,12F Automatic Transmission |
| Clutch | ETONФ430 Diaphragm Imported |
| Front Axle | MAN 7.5 Ton (Drum) |
| Rear Axle | 16 Ton MAN Double Stage Punch Welding for Mixer and powder Trucks,
13 Ton MAN Double Stage for rest |
| Suspension | Multi Leaf Springs |
| Frame(in mm) | 850×300(8+5) 850×300(8+7)for Mixer Trucks 850×300(8+5)for Rest |
| Fuel Tank | 300 / 400 Liter Aluminum 380 Liter Steel |
| Tires | 11.00R20、12.00R20 |
Product detail pictures:


Related Product Guide:
Chinese state group Shaanxi Automobile Group to manufacture trucks in Brazil | Shacman S2000 4×2 Prime Mover
Distribution agreement between Premval & SHACMAN Trucks signed | Shacman S2000 6×4 Truck Chassis
We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for Manufacturer for Shacman 6×4 450hp Truck Chassis - 6×4 Cement F3000 – Automobile Holding, The product will supply to all over the world, such as: Mauritius , Belarus , Rome , Our products and solutions are sold to the Middle East, Southeast Asia, Africa, Europe, America and other regions, and are favorably appraised by clients. To benefit from our strong OEM/ODM capabilities and considerate services, be sure to contact us today. We will sincerely create and share success with all clients.
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!








